Detached Microwave High Bay Motion Sensor Remote Control Setting

Operating Voltage: 120~277 VAC 50/60Hz

Switching Capacity: Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz

Mounting Height: 8-15m /26.25-49.2ft

Operating Temperature: -30°C~+70°C

Microwave Power: <0.3mW

Motion Detection: 0.5–1.5m/s

Control Method: On/off / 1-10V Dimming;Dusk/Dawn Sensor;Remote Control

Stand-by Power: ≤1W

Detached Microwave High Bay Motion Sensor Remote Control Setting

Dawn Sensor Remote Control Setting Detached Design Highbay Motion Sensor

HD405V-CRH 1 +HD02VRH-1.pdf

Features of Dimmable Motion Sensor:

1. Dual setting by DIP switch and remote control.

2. Supporting different installation and applications, for surface mounting, traditional LED highbay with aluminium reflector, UFO highbay or linear/triproof highbay.

3. Tri-level control by 1-10V output.

4. Dusk/Dawn Sensor.

5. Sensitive and reliable

6. 8-15m High altitude installation.

7. 5 year warranty.

Technical data of Dimmable Motion Sensor:

Model number	HD405V-CRH
Operating voltage	120-277VAC,50Hz/60Hz
Switching capacity	Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz
Stand-by power	≤1w
Control method	On/off / 1-10V Dimming Dusk/Dawn Sensor Remote Control
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
Detection area	50%/100%
Hold time	5s/30s/1min/10min
Daylight threshold	2Lux/10Lux/50Lux/Disable
Stand-by period	0s/30s/20min/+∞
Stand-by dimming level	10%/20%/30%/50%
Interfaces	6-pole pluggable clamp temminal(L,N,PUSH,DALI)for 0.75-1.5mm² cable
Mounting height	8-15m /26.25-49.2ft
Deteation range	Max.ø14m/45.93ft
Motion detection	0.5–1.5m/s
Packing method	①the bubble pack, ②paper flat, ③outer carton(400300236mm)with drying agent(70pcs/carton,gross weight 8.17kg)
Detection angle	30°-150°
Operating temperature	-30°C~+70°C
IP rating	IP 20
Warranty	5 years

On/Off Control Detection Area Hold Time Daylight Sensor

Stand-by dimming Stand-by Remote Control 5 Years Warranty

level Period

10-15m Highbay

Dtection Area of Dimmable Motion Sensor:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 8-15m.

Mechanical structure of Dimmable Motion Sensor:

Support remote control setting parameters.

Dimensions of Dimmable Motion Sensor:

Motion sensor setting and dimming setting please refer to remote control HD03R.

HD02VRH 1 Wire diameter 4mm,Standard Version Cable Length 485mm(can be

customized).

Wiring diagram of Dimmable Motion Sensor:

Setting of Dimmable Motion Sensor:

Can also set the parameters with the following nine-digit dialing code.

Detection area:

In this area,movement will be detected and able to trigger the sensor.100% detection area is also known as the strong sensitivity.

Hold time:

The period of light keeping 100% brightness after moving objects leave the detection area.

Daylight threshold:

Definition of the ambient brightness;only when the ambient brightness is lower than the preset specific lux amount,the sensor will be work;when it's preset as "disable",the sensor will work everytime it detects motion regardness the ambient brightness.

Stand-by period:

The period of light keeping low output before it's completely switched off,when it's preset as"∞",the light always keep at low output if no movement in the detection area and doesn't turn off.

Stand-by period:

The definition of low output in the stand-by period.

Daylight Priority of Dimmable Motion Sensor:

Dusk/Dawn sensor:

Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between

natural light and LED light, to ensure the light will be off when needed.

With Daylight priority function, HD02VRH 1 is able to differentiate artificial light brightness

from natural light after installed inside the fixture, and automatically turn off light when

ambient brightness exceeds preset lux level.

Precondition of Daylight priority:

1. Standby period is +∞;

2. Standby dimming level is on 10%, 20% or 30%;

3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.

Application——Lux on/off:

Light automatically on With insufficient ambient Light dims to

when ambient brightness,light dims to standby level if no

brightness is lower 100% when motion motion detected after

than preset lux level. detected. holdtime.

Light off when ambient

lux level is higher than

preset lux amount.

Installation Method of Dimmable Motion Sensor:

Application of Dimmable Motion Sensor:

1.automatically ON/OFF function:

Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.

With sufficient daylight,even With insufficient daylight, After the last detection and the

when motion detected,light when motion detected, present hold time elapsed,

remains OFF. light ON. light OFF.

2.No daylight function:

The daylight threshold is set to "Disable".

Light on when detect movement, After people leave, Light off after stand-by period.

Applications: Dim places such as Basement Parking, Underpass.

When motion is detected, After people leave the After the last detection and

the sensor will switch on the detection area,light remains the present hold time

light to 100% brightness. 100% brightness within elapsed,light OFF.

hold time.

3.Function demo-dimable control/corridor function

With sufficient daylight,even With insufficient daylight, After the last detection the light

when motion detected,light when motion detected, will be dimmed down to the

remains OFF. light ON. stand-by dimming level

(10%,20%,30% or 50%)

after hold time.

After the stand-by period,

light OFF.

Application of Dimmable Motion Sensor:

User Notes:

1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

Products Tag : Detached Microwave High Bay Motion Sensor Remote Control Setting