Tri Proof Light IP20 Microwave Motion Sensor With Linear Design
Tri Proof Light IP20 Microwave Motion Sensor With Linear Design
Tri-proof light microwave sensor with liner design-HD02V 1,1-10V dimming and mesh networking
Features:
- Linear design sensor with operating voltage of 220-240V for tri-proof and linear light.
- With 12 DIP switch keys, it provides more options for the Hold time, Detection area, Stand-by period, Stand-by dimming level and Daylight threshold.
- Turn off the light or dim the light to a lower brightness like 10%, 20% and the like when no movement to save energy and play a role of sustainability.
- Smartly turn on the light to be 100% brightness when detect the movement with an insufficient daylight.
- 7 pole pluggable clamp terminal((L,N,N,L’, 1-10V+,1-10V-, SYNC) for 0.75-1.5mm² cable.
- With the function of SYNC, the sensor could be connected with other sensors in one group which make all light in this group will work synchronously like an mesh networking
- Different options of detection range like 10%, 50%, 75%, 100% to shorten the detection area which could be widely used in parking lot to avoid false trigger.
- With rod antenna, the module is super compact to be easily installed inside of tri-proof and linear light with a very small hole.
- IP20 and 5 years of warranty.
- Certificate of CE/RoHs
Specifications:
| Input | Operating Voltage | 220~240 VAC 50/60Hz | |
| Stand-by Power | ≤1W | ||
| Output | Switching capacity | Max.400W(Control gear) Max.800W(Incandescent lamp) | |
|
Sensor Parameters |
Hold Time | 5s/30s/1min/5min/10min/20min/30min | |
| Detection area | 10%/50%/75%/100% | ||
| Daylight Threshold | 2Lux/10Lux/50Lux/Disable | ||
| Stand-by period | 0s/10s/1min/10min/30min/1h/∞ | ||
| Stand-by dimming level | 10%/20%/30%/50% | ||
| Mounting Height | Max.4m(ceiling mounted); Max.3m(wall mounted) | ||
| Detection Range | Max.14m(ceiling mounted); Max.10m(wall mounted) | ||
|
Wireless Parameters |
Operating Frequency | 5.8 GHz ±75 MHz | |
| Dimming Control | Dimming | ||
|
Operating Environment |
Temperature | -20°C~+55°C | |
| Detection angle | 30°-150° | ||
| Certificate | Certificate | CE / RoHs | |
|
Others |
IP Rating | IP20 (Built-in) | |
| Installation Size | 162.6mm*32.4mm*31.3mm | ||
| Packaging | Bubble bag +Outer Carton(K=A) | ||
| Life | 50000h | ||
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
stand-by period stand-by dimming
level
Dimensions:
- With the slim structure and width of only 32.4mm , it’s specially designed for Tri-proof and linear light with built-in installation method.
- With two installation hole, it could be tightly fixed on the light structure with screw.
- It could be also installed with module only without any housing to save space.
Wiring Diagram:
With the terminal of SYNC, several sensors could be connected with each other in one group. it could keep all of the light being connected in the same group to be synchronous which means all of the light will keep the same status all the time.
Dip switching settings:
Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level
In this area, The period of Definition of the the period of light The
movement will light keeping ambient brightness; keeping low output definition of
be detected 100% brightness only when the before it's completely low output
and able to after moving ambient brightness switched off.when it's in the
trigger the objects levea is lower than the preset as"∞",the light stand-by period.
sensor. 100% the detection preset specific always keep at low
detection area area. lux amount,the output if no movement
is also known sensor will work; in the detection area
as the strong when it's preset and doesn't turn OFF.
sensitivity. as"disable",the
sensor works
everytime it
detects motion
regardless the
ambient brightness.
Detection Area (Sensitivity)
| 1 | 2 | ||
| Ⅰ | ON | ON | 100% |
| Ⅱ | ON | - | 75% |
| Ⅲ | - | ON | 50% |
| Ⅳ | - | - | 10% |
Hold Time
| 3 | 4 | 5 | ||
| Ⅰ | ON | ON | ON | 5S |
| Ⅱ | - | ON | ON | 30S |
| Ⅲ | ON | ON | - | 1min |
| Ⅳ | - | - | OM | 5min |
| V | - | ON | - | 10min |
| VI | ON | - | - | 20min |
| VII | - | - | - | 30min |
Daylight Threshold
| 6 | 7 | ||
| Ⅰ | ON | ON | Disable* |
| Ⅱ | ON | - | 50Lux |
| III | - | ON | 10Lux |
| Ⅳ | - | - | 2Lux |
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of ambient light level.
Stand-by Period
| 8 | 9 | 10 | ||
| Ⅰ | ON | ON | ON | 0S |
| Ⅱ | - | ON | ON | 10S |
| Ⅲ | ON | ON | - | 1min |
| Ⅳ | - | - | OM | 10min |
| V | - | ON | - | 30min |
| VI | ON | - | - | 60min |
| VII | - | - | - | ∞ |
Stand-by dimming level
| 1 | 2 | ||
| Ⅰ | ON | ON | 100% |
| Ⅱ | ON | - | 75% |
| Ⅲ | - | ON | 50% |
| Ⅳ | - | - | 10% |
Application Demo - Function Demo-On/off control:
With sufficient daylight, With insufficient daylight, After the last detection
even when motion when motion detected, and the present hold
detected, light remains light ON. time elapsed, light OFF.
After the stand-by period,light OFF.
